Structural Living Shoreline Options

  • Headland Control Breakwaters
    Headland Control Breakwaters  Headland Control along a high energy shoreline. The breakwaters units are placed strategically along the coast, and the shoreline in between has eroded to a predicted bay shape. This method can be a more cost-effective method to protect long reaches of shoreline.  Photo by Shoreline Studies Program
  • Detached Breakwater
    Detached Breakwater  Detached breakwaters in a high energy area with a strong unidirectional alongshore sand transport system. Behind the structures, a sand salient widens the beach and provides some protection to the created dune. The system allows sand to continue to move along the shore in order to minimize downdrift impacts.  Photo by Shoreline Studies Program
  • Headland Breakwater
    Headland Breakwater  Headland attached breakwaters just after construction. Inset shows the site six years after installation. The wide, vegetated beach and backshore stabilizes the shore and provides protection in this relatively high energy area.  Photo by Shoreline Studies Program
  • Sill Systems
    Sill Systems  A system of sills with gaps or windows along an historic shoreline. The sills with planted marsh protect the base of the high upland bank, which is graded in some areas. The point of land was eroding quickly away threatening to breach the pond.  Photo by Shoreline Studies Program
  • Sill
    Sill  A sill with marsh in a medium to high energy environment. The riprap structure is necessary to provide protection to the planted marsh and, therefore, stability to the shoreline. Without the sill, the marsh would erode due to the site’s wave climate. A gap in the structure provides a sandy beach and access to the river.  Photo by Shoreline Studies Program
  • Spurs
    Spurs  Transitional structures such as spurs are used to interface adjacent shorelines or structures to a breakwater or sill system. In this case, a large spur has been constructed from the adjacent revetment to maintain the desired bay shape of the last breakwater and bay. Transitional structure type, size, and orientation are dependent on site-specific conditions.  Photo by Shoreline Studies Program
Photo - of -
In order to maintain a more natural coastal profile, the Shoreline Studies Program at the Virginia Insitute of Marine Science prefers to use Living Shoreline methods for shore stabilization. Structural living shorelines consist of sills, breakwaters, and transition structures called spurs.
Sills

A sill is a rock structure placed parallel to the shore so that a marsh can be planted behind it. It has been used extensively in Chesapeake Bay due to the fact that these structures can be used in a wide range of habitats and energy levels. Sills create a natural buffer and preserve and/or create habitat for benthic, estuarine, shallow water, and intertidal organisms. The use of rocks in creating the sill is necessary to protect the created habitat from erosion.

The sand for the wetlands substrate is usually placed on a 10:1 slope from the base of the bank to the back of the sill. The elevation of the intersection of the fill at the bank and tide range will determine, in part, the dimensions of the sill system. However, the design can be adjusted to fit particular sites. For long sites, gaps or windows can be placed in the sill to provide access for animals and  human recreation. Design and construction generally requires a trained contractor. These sites may require ongoing maintenance, particularly after storm events.

See Hardaway and Byrne (1999) for more information.

Breakwaters

Breakwaters are a series of large rock structures placed strategically offshore. Headland breakwaters maintain stable pocket beaches between the structures and a sand tombolo that attaches the structure to the shore. Detached breakwaters are placed farther offshore to allow sand to continue to be transported alongshore. The wide beaches provide most of the protection, so beach nourishment should be included as part of the strategy and periodic beach re-nourishment may be needed. Headland Control is a method of shore control where breakwater units are placed strategically along a shoreline with the understanding that the land between the structures will erode to a predicted stable bay-shape over time. This method is effective along stretches of shoreline, particularly undeveloped farmland, where more closely spaced headland breakwaters would not be cost effective. 

Although single breakwaters can be used, two or more are recommended to address several hundred feet of coast.  For breakwaters, the level of protection changes with the system dimensions. Larger dimensions generally correspond to bigger fetches and where a beach and dune shoreline is desired. These systems create a natural buffer and preserve and/or create habitat for benthic, estuarine, shallow water, and intertidal organisms. These systems require a trained designer and contractor because of potential downdrift impacts.

See Hardaway and Byrne (1999) for more information.

Transition Structures: Spurs

In order to minimize impacts of structures on adjacent properties, spurs are used as a transitional structure. Transition structures can vary greatly depending on site-specific conditions of the reach. They can attach to an adjacent structure such as a revetment or groin to prevent flanking. They can be shore attached to help maintain the integrity of the shore protection system while seeking to minimize disruption to the alongshore sediment transport system and downdrift erosion.

Next

Shoreline Studies Home Page